More mission

Sunday morning walk time with my wife and Scully… we did what has become our routine walk around a loop that leads past a bakery and then down by the water where Scully chases a tennis ball on the grass. I’ve lost a few tennis balls over the years, accidentally throwing them into drains and stuff. Today I lost Scully’s ball by accidentally rolling it down a hill, onto the wharf, and through a tiny gap in the wooden barrier… plop! Into the harbour! So after that Scully was expecting me to throw the ball some more, but I couldn’t.

My wife suggested we always carry a spare ball. But that just means that inevitably one day I’ll lose two balls in one outing.

I wrote some more Darths & Droids stuff today – both background plotting info, and a new comic.

Oh, and I did a quick sketch response to the latest xkcd comic (2307):

continuum or binary

New content today:

Long slog

So yesterday I intended to write at least three Darths & Droids strips, and got zero done. Rinse, repeat. I did however, get some story planning done, and discuss some plot points with fellow writers. So that wasn’t a total loss.

What did I get done today? Hmm. Oh that’s right, I played golf this morning with a friend, at the pitch ‘n’ putt course (all holes par 3). After last time I lost badly with a matchplay/skins handicap of 16, my friend granted me an increase to 17. But today I played a lot better, and ended up winning 12-6. So next time we play there I’ll go back down to a handicap of 16. My total round for 18 holes was 79 strokes, which was 2 better than my previous record of 81. So I was pretty pleased with that!

I didn’t get home until after lunch, so that’s where half my day went. I spent some time dealing with housework stuff – we had to buy a new vacuum cleaner because our old one broke the other day, and I had some unboxing and then discarding of packaging and the old vacuum cleaner to do.

And there was some Scully walking… in the rain, as the weather closed in a bit after lunch. Walking a dog in nice weather is fine, but having to do it in inclement, cold weather is a bit of a chore.

This evening I’m playing some Codenames online with some friends. My team-mate just clued “LINUS 2” and I guessed the words PUMPKIN and VAN (from the grid of 25 words), and got them correct. And both of our opponents were absolutely mystified as to how I managed to guess the correct words!

New content today:

Plumbing emergency

My plan today was to write some Darths & Droids strips – preferably at least three. I ended up writing zero.

I had some shopping to do – first the weekly groceries. Then I also had to go pick up a game for the current redditgifts board games exchange, which I signed up for. Being such a game player, I couldn’t resist signing up for this one. The nearest game store is a few minutes drive away. I got there a bit before 1:30, but there was a sign on the door saying “back at 2pm”! I guess they’re not getting much business with the COVID restrictions, and decided to actually close up shop for the lunch break. Since I was there, I decided to wander around for half an hour, rather than drive all the way home and have to come back again. So that ate up more time than I expected.

The other thing I wanted to do today was attend to a leaky tap on the bathroom sink. The cold water tap there has been annoying me for years. I have to replace the valve far too frequently, because after just a few weeks the tap starts dripping and needs to be turned off ever harder, until it gets to the point where I can’t turn it off hard enough to prevent it dripping.

I recently bought a tap reseating tool to see if grinding the tap seat down a bit would help, but that didn’t seem to make much difference. And again, just a few weeks after the last time I replaced the valve, it’s been dripping incessantly again. So today I pulled it apart and had a good hard look at it after grinding it a bit with the tap reseating tool.

After a bit of manual grinding, the tool makes the tap seat nice and flat with a shiny new brass surface. This should be ideal for a valve to sit on and cut off the water flow when screwed down by the tap handle. But shining a torch into the tap seat well I could see an odd dark mark on the shiny brass. It was hard to make out, and trying to wipe it away didn’t remove it. I ground the seat a bit more, but the mark was still there. Then it clicked and I realised what it must be. I got a blade and ran it around the flat brass seat… and yes, I could feel what was a crack in the seat.

Cracked tap seat

I took this photo with the help of the torch light. You can see the crack pretty clearly near the top of the shiny brass ring. (And also a lot of the glittering brass flakes that I’d ground away.) Well. This was how the water leak was getting out, even when the tap was screwed down tight with a nice new valve. I’d never noticed it before using the reseating tool because the brass surface was old and dark. It took grinding down to shiny new metal to provide enough contrast to see the crack.

I consulted with a friend who is more of a handyman than I am, and he said I could try grinding further to see if I could remove the crack, otherwise I’d probably need to call in a plumber to replace the whole tap seating assembly – in a job which might require removing the entire bathroom sink and vanity unit. That sounded pretty drastic and expensive, so I gave the grinding a bit more of a go…

It took me some time, and several intermediate checks on progress, but I managed to grind away enough of the brass that the crack is basically gone. I hope. I fitted a new valve and reassembled the tap, and it seems to be working nicely now – shutting off the water completely with relatively little effort. Hopefully it will stay that way and require less maintenance, with the crack not reappearing. If it does, I suppose it will have to be a plumber job next time.

New content today:

Puzzle archives

Today I completed the work I began yesterday with those old computer files. It was to put on my website a mirrored archive of the old CiSRA Puzzle Competition that I ran with some friends of mine from 2007 to 2013 at our old employer. After the company shut down last year (and we all lost our jobs), the original website vanished. There’s a copy on archive.org, but nowhere else. I decided some time ago to host a mirror myself, but haven’t sat down to do the work to reformat the links and make an index page until now. But now it’s done! Another task I can tick off my long to-do list.

I’ve also been doing some administrative work related to ISO photography standards. I’ve probably mentioned that we have a planned meeting to be hosted in Sydney in February next year, and as the chair of the Australian photography standards committee, it’s my job to keep that on track. But of course with the COVID-19 restrictions on meetings and international travel, ISO is currently running all standards meetings virtually – currently until at least the end of August, but that could easily be extended. So it’s not clear at all if the Sydney meeting will go ahead as a physical meeting, or a virtual meeting, or perhaps a physical meeting with some delegates unable to attend due to travel restrictions in their countries. So today I had a bit of back and forth emailing to the international conveners and Standards Australia, to raise the issues and ensure that there are no problems that may arise that we need to deal with now. (It’d be nice if I got paid for any of this work…!)

Oh, and Scully got a wash and trim at the dog groomer today. She’s looking neat and tidy, but with her fur trimmed short and the nights getting colder here, she definitely needs the pyjamas I showed a few days ago.

New content today:

Weird computer behaviour

This morning I finished writing annotations for the latest batch of Irregular Webcomic! strips. So that batch is out of the way… and I can start thinking about the next batch.

Besides going out for a bit and getting some fresh air and doing some normal household things, I spent a bit of time today wrestling with a weird computer problem.

I have some files on my Mac that I copied across from a Windows machine. They ended up with permissions 555, so I changed them to 644 as is usual. But when I opened a file to edit in my usual GUI editor (BBEdit), it complained that I didn’t have write permission to the file, and asked if I wanted to change the permission. Without thinking too much I clicked yes, edited the file, and saved it.

But then after I uploaded it to my web server, it was still the unedited version. And looking at the file from the command line with vi, it was the unedited version. But… re-opening the file from the fie browser into BBEdit showed the edited version that I’d saved… at the same file path location!

So now there seem to be two different versions of the file at the same file location somehow. I tried editing using vi from the command line, and that does what I expect, saving a new version, but if I open it in BBEdit, it still appears as the version I saved using BBEdit, not with the edits made with vi.

I really don’t understand what’s going on here. The best thing I can guess is that Windows set some sort of non-writeable flag that BBEdit detects, and then it works around it by asking if you want to change the file permissions… and then it secretly writes the new version to a different place in the file system, but maintains a link to the original location, so that if you ever open the original file location again, BBEdit actually fetches the secret copy – all the while telling you that it’s looking at the original file location. Because there are actually now two different versions of the file, apparently in the same file location, but obviously that’s impossible.

I can work around this by editing only in vi, but I’d like to know what the heck is going on, and if there’s any way to get BBEdit to open the original file location, rather than its own secret (modified) copy.

New content today:

Autumnal

It was cold today. Positively autumnal. The forecast for the next week has temperatures hovering a degree either side of 20°C, which is cool for Sydney, but not quite wintery. I fear yesterday’s 27°C was indeed the last of the truly warm weather until spring.

Today was a random melange of walking Scully, housecleaning, making some Darths & Droids comics, and cooking dinner. I made an “autumn risotto” – with hazelnuts and mushrooms (shiitake, oyster, and king oyster). I was originally just going to make mushroom, but was inspired to throw in some hazelnuts by the fact that my wife was watching a cooking show while I was cooking, and the chef on there made something with hazelnuts. I overheard it and immediately thought, “Yes! That’d go great with mushrooms!” and so tossed some in. And it indeed turned out great – the crunch of the nuts adds a lot to what is typically quite a mushy dish.

New content today:

Pseudo-Mother’s Day

Today was not Mother’s Day in Australia, tomorrow is. But my wife and I visited her mother today, since under the current COVID restrictions household visits are limited to two people at a time, and her other daughter (my wife’s sister) and her son are visiting tomorrow – so we can’t be there at the same time. Rather than juggle times, we just went over today. We had a morning tea and then went for a walk.

It turned out to be a good day to go out, because it was a beautiful day, sunny and warm, with a few clouds in the bright blue sky. The temperature was 27°C. And I think this may well be the last warm day of autumn, as we are forecast for a cold change tonight, and tomorrow will be a frigid 19°C, leading into a week that barely gets above 20°. Winter is definitely just around the corner.

Clontarf panorama view

I took some photos on the walk, including a few panoramas to capture the views.

Clontarf Beach

We walked down to the nearby small beach on the harbour. This is very sheltered beach, with wide shallow water over sandflats, so ideal for families with young kids.

Sandy Bay walk

There were a few people out enjoying the last fine weather of the summer, but no huge crowds. A few joggers, and people out walking their dogs. (Like us!)

Sandy Bay dog park

And this wide exposed sandflat is one of the very few places in Sydney where it’s legal to take your dog onto the beach (there’s only one other place I know of). So of course it’s insanely popular with people and their dogs.

Back home, I wrote some Darths & Droids scripts, did some housecleaning and some cooking, and watched some TV. I was going to watch a DVD, but the remote control failed to work, and I didn’t have the right batteries handy to replace them, and I couldn’t access the navigation menus from the player console, so I had to give up and watch Netflix instead…

New content today:

Fortnightly games night

It’s the Friday of our fortnightly board games night, and I am currently in the middle of a game of Bärenpark as I type this up, via Tabletop Simulator as we hold it virtually during COVID lockdown.

This morning I did a weekly grocery shop. I’ve scaled down the shopping list after realising that I was buying too much food for us to eat in a week, so it was a smaller shop than it has been the last few weeks. After that I spent the rest of the morning photographing the new batch of Irregular Webcomic! comics that I finished writing last night, which took up until lunch time.

This afternoon I went out with my wife and Scully to check out the new premises of her doggy daycare and grooming place, which is moving this weekend. It’s near a kitchen supply shop, and I went in to buy a new kitchen knife. Turned out they had a huge sale on knife sets, so I ended up getting a set of 6 knives and matching knife block. I’m quite excited, as we’ve only ever had cheap knives before, and now I feel like a proper chef with a fancy set of knives.

New content today: